Setup problem - cannot create folders/admin/mailbox? (fwd)

[Eric Clemens]

To: Adam Polkosnik
Subject: RE: Setup problem - cannot create folders/admin/mailbox?


That worked! I am able to get in, it prompts me for password, then for
imap password. I need to figure out what the imap password is and I'll be
home free.

THANKS!
-Eric

On Tue, 11 Mar 2003, Adam Polkosnik wrote:

> I suggest using cyradm --auth plain --user cyrus localhost
>
> that is if you allow this mech to be accepted (I hope)
>
>
> -----Original Message-----
> From: owner-info-cyrus at lists.andrew.cmu.edu
> [mailto:owner-info-cyrus at lists.andrew.cmu.edu]On Behalf Of Eric Clemens
> Sent: Tuesday, March 11, 2003 8:19 AM
> To: Joe Dennick
> Cc: info-cyrus at lists.andrew.cmu.edu
> Subject: RE: Setup problem - cannot create folders/admin/mailbox?
>
>
>
> Thanks Joe, however I still receive
>
> cyradm: cannot authenticate to server with  as cyrus
>
> when I try to authenticate. Also, in my logs I am getting.
>
> www perl: krb_mk_req() failed: No ticket file (tf_util) (76)
> www perl: No worthy mechs found
>
> Thanks.
> -Eric
>
> On Mon, 10 Mar 2003, Joe Dennick wrote:
>
> > Try using the following command to get cyradm to work:
> >
> > cyradm --user cyrus localhost
> >
> > It will then ask for cyrus's password.
> >
> > Once authenticated, you can create your users with the command:
> > cm user.userid (replace userid with the appropriate user's name)
> >
> > After you've done that, you can create sub-folders with the command:
> > cm user.userid.newfolder
> >
> > I usually create sent-mail, drafts, and trash for all of my users.
> >
> > Finally, after you've created your user's mailboxes, you can then copy
> their mail
> > from the old server to the appropriate folder on the new server.
> >
> > I hope this helps.
> >
> > Joe Dennick
> > joe at dennick.net
> >
> > Eric Clemens <me at ericclemens.com> wrote the Mar 10, 2003 2:55 PM:
> >
> > >
> > > I appreciate any help someone could offer with my problem outlined
> below.
> > > I am trying to convert my system from using imap-uw to cyrus. imap-uw
> was
> > > working fine until about 3 weeks ago when out of the blue it just
> stopped
> > > allowing anyone to authenticate. After trying to fix that problem was
> > > unsuccessful, I thought it would be better to upgrade to cyrus.
> > >
> > > I am running FreeBSD 4.7 and installed cyrus-imapd-2.1.12 from the
port
> > > tree using make install.
> > >
> > > I am loosely trying to follow the instructions in the (outdated) cyrus
> FAQ
> > > and everything that is mentioned seems good..
> > >
> > > I ran mkimap successfully. The directions then ask to run chattr +S on
> > > several files. I don't know what the FreeBSD equivalent would be for a
> > > chattr +S, so I skipped this step.
> > >
> > > In section 8.2 of the FAQ - testing, I was able to successfully test
the
> > > server at one point, however it now appears it doesn't like my
> password...
> > > hummm.
> > >
> > > In section 8.3 of the FAQ, when I issue the command cyradm 'localhost'
I
> > > receive the following reply: 'cyradm: cannot authenticate to server
with
> > > as cyrus'
> > >
> > > That seems to be where I am stuck.
> > >
> > > I am running a default configuration, I have not changed any of the
> > > settings.
> > >
> > > I did some searching through the list archives, and my
> sasl_pwcheck_method
> > > is set to saslauthd.
> > >
> > > On a final note, I am able to log in and authenticate using an IMAP
> client
> > > and a system account - but I do not have ANY folders to read mail
from.
> > >
> > > NOTE: I have folders and messages saved in folders from when I was
using
> > > imap-uw - I'd like to save that data... can I? (I have the files)
> > >
> > > I cannot seem to make any headway on this and appreciate anyone's help
> and
> > > input.
> > >
> > > Thanks.
> > > -Eric
> > >  me (at) ericclemens.com
> >
> >
>
>
>