Question for upgrading

Egoitz Aurrekoetxea egoitz at sarenet.es
Fri Dec 14 10:11:51 EST 2018


Common Bron, Ellie, mates :) any advise? 

Cheers :) :)

---

EGOITZ AURREKOETXEA 
Departamento de sistemas 
944 209 470
Parque Tecnológico. Edificio 103
48170 Zamudio (Bizkaia) 
egoitz at sarenet.es 
www.sarenet.es [1] 
Antes de imprimir este correo electrónico piense si es necesario
hacerlo. 

El 13-12-2018 19:25, Egoitz Aurrekoetxea escribió:

> Hi again! 
> 
> Else as a simplication way can you replicate any manner a 2.3 with some newer version?. At least in manual mode (not rolling)?. 
> 
> Cheers.
> 
> ---
> 
> EGOITZ AURREKOETXEA 
> Departamento de sistemas 
> 944 209 470
> Parque Tecnológico. Edificio 103
> 48170 Zamudio (Bizkaia) 
> egoitz at sarenet.es 
> www.sarenet.es [1] 
> Antes de imprimir este correo electrónico piense si es necesario hacerlo. 
> 
> El 13-12-2018 16:52, Egoitz Aurrekoetxea escribió:
> 
>> Good afternoon, 
>> 
>> I was trying to upgrade part of our Cyrus imap installation, concretely that one consisting in still 2.3. I was planning to set up Cyrus 3.0. I have seen all works properly except for the unexpunge command because as someone stated here, a reconstruct -V max was needed.The problem is that this reconstruct command, takes ages and I'm not able to keep the service offline so many time. So I have been thinking in the following scenario : 
>> 
>> - Cyrus 2.3 master -> Cyrus 2.4 slave 
>> 
>> Get this 2.4 slave ready and set it as master. But here comes my first doubt. Does the 2.4 replication work with the 2.3 replication?. Can in this pair, both (the 2.3 and the 2.4) be both master and slave?. I mean to switch roles in the pair. Make one become master and the other slave and  vice versa?. 
>> 
>> Let's think now Cyrus 2.4 is ready and working. 
>> 
>> - Now, I would set up a new 3.0 slave. I know 2.4 could replicate with 3.0. So I would get the 3.0 ready and then set 3.0 as master. Can in this pair both the 2.4 and 3.0 be master and slave?. Meaning again to the same role switching commented before... to make one to be master and the other slave or vice versa.... 
>> 
>> I'l will end up with 2 3.0 master and slave... but I need to trace the path... 
>> 
>> Does anyone see any other way?. 
>> 
>> Best regards, 
>> 
>> -
>> 
>> -- 
>> 
>> EGOITZ AURREKOETXEA 
>> Departamento de sistemas 
>> 944 209 470
>> Parque Tecnológico. Edificio 103
>> 48170 Zamudio (Bizkaia) 
>> egoitz at sarenet.es 
>> www.sarenet.es [1] 
>> Antes de imprimir este correo electrónico piense si es necesario hacerlo. 
>> ----
>> Cyrus Home Page: http://www.cyrusimap.org/
>> List Archives/Info: http://lists.andrew.cmu.edu/pipermail/info-cyrus/
>> To Unsubscribe:
>> https://lists.andrew.cmu.edu/mailman/listinfo/info-cyrus
> 
> ----
> Cyrus Home Page: http://www.cyrusimap.org/
> List Archives/Info: http://lists.andrew.cmu.edu/pipermail/info-cyrus/
> To Unsubscribe:
> https://lists.andrew.cmu.edu/mailman/listinfo/info-cyrus
 

Links:
------
[1] http://www.sarenet.es
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.andrew.cmu.edu/pipermail/info-cyrus/attachments/20181214/1a1e9c7d/attachment.html>


More information about the Info-cyrus mailing list