Postfix with Cyrus Imap

Karol Pomaski kpomaski at mexnetwork.com
Sun Jan 26 12:19:09 EST 2014


Ok, well thanks for the info.
There is only one problem with my Cyrus Imapd 2.4.16... I have not found 
autocrate path for this version of Cyrus.


Regards,
Karol




------ Original Message ------
From: "Dan White" <dwhite at olp.net>
To: "Karol Pomaski" <kpomaski at mexnetwork.com>
Cc: info-cyrus at lists.andrew.cmu.edu
Sent: 1/26/2014 11:13:23 AM
Subject: Re: Postfix with Cyrus Imap

>On 01/26/14 02:28 +0000, Karol Pomaski wrote:
>>Yes I have all the files. I am using Debian, do you know if this patch
>>is already there?
>
>I don't think so, but you could check with
>pkg-cyrus-imapd-debian-devel at lists.alioth.debian.org.
>
>>Here I send you all my configuration files. Could you check what is
>>incorrect? Also while trying to connect through cyradm using 'cyrus'
>>user it doesn't permit me to enter. Which password should be used for
>>cyrus user?
>
>Below, you have configured the admin user to be 'cyrus'. You will need 
>to
>have that user configured within your mysql database, with whatever
>password you wish to use.
>
>>imapd.conf
>>-------------
>>admins: cyrus
>>
>>autocreatequota: -1
>>
>>virtdomains: on
>>
>>allowplaintext: yes
>>sasl_mech_list: PLAIN LOGIN
>>sasl_minimum_layer: 0
>>#sasl_maximum_layer: 256
>>#loginrealms: example.com
>>#defaultdomain:
>>sasl_pwcheck_method: saslauthd
>>#sasl_auxprop_plugin: sasldb
>>sasl_auto_transition: no
>
>Your SASL config matches up pretty well with your postfix sasl config.
>
>Your virtual domain configuration appears broken. See:
>
>http://cyrusimap.org/docs/cyrus-imapd/2.4.17/install-virtdomains.php
>
>You may wish to specify a default domain (for your primary admin/cyradm
>logins), and then list all supported domains within 'loginrealms'.
>'virtdomains: userid' may be more appropriate.
>
>>smtpd.conf
>>
>>pwcheck_method: saslauthd
>>mech_list: plain login
>>allow_plaintext: true
>>auxprop_plugin: sql
>>sql_engine: mysql
>>sql_hostnames: 127.0.0.1
>>sql_user: mail_admin
>>sql_passwd: 111
>>sql_database: mail
>>sql_select: select password from users where email = '%u@%r'
>
>Assuming your postfix was compiled against cyrus sasl, your
>'auxprop_plugin' and 'sql_*' statements here likely have no effect on 
>your
>postfix user authentication. I would comment them out and verify, since 
>it's
>likely adding to some confusion.
>
>>/etc/defaults/saslauthd
>>
>>START=yes
>>DESC="SASL Authentication Daemon"
>>NAME="saslauthd"
>>MECHANISMS="pam"
>>MECH_OPTIONS=""
>>THREADS=5
>>OPTIONS="-c -m /var/spool/postfix/var/run/saslauthd -r"
>
>This is a problem, as by default cyrus imapd will attempt to
>communicate with saslauthd using the standard mux location. See:
>
>http://asg.andrew.cmu.edu/archive/message.php?mailbox=archive.info-cyrus&msg=54942
>
>for options.
>
>For trouble shooting, I run saslauthd in debug mode to verify imapd is 
>able
>to communicate with the saslauthd mux.
>
>-- Dan White



More information about the Info-cyrus mailing list