AW: Re: Cyrus 2.4.9 doesn't run on none standard ports

[Klemens Puritscher]

Dan White schrieb:
> On 23/06/11 22:12 +0200, Klemens Puritscher wrote:
> >Hello,
> >
> >I'm using cyrus-imapd(currently 2.3.16) for many years and I'm quiet 
> happy with it.
> >Now I'm testing the new 2.4.9 version - SRPMS from Simon Matter.
> >
> >Based on historical reasons the lmtpd should run on port 26.
> >...but the lmtpd didn't start.
> >Only when I use the standard port 24 it will work.
> >
> >My "/etc/cyrus.conf":
> >
> >That works: (lmtpd processes starts an listen on port 24)
> >  lmtp          cmd="lmtpd -a" listen=24 prefork=5 maxchild=200
> >
> >that not: (no lmtpd starts...)
> >  lmtp          cmd="lmtpd -a" listen=26 prefork=5 maxchild=200
> >
> >The same with pop3d (for testing...):
> >That works:
> >  pop3          cmd="pop3d" listen=110 prefork=3
> >
> >That works not: (no pop3d starts...)
> >  pop3          cmd="pop3d" listen=110 prefork=3
> 
> What error are you seeing in syslog with this configuration?
> Try running master with '-D'.
> 
> Do you see port 26 open in the output of:
> 
> netstat -an | grep LISTEN

No.

> Do you experience the same problem if you use:
> 
> lmtp          cmd="lmtpd -a" listen="lmtp" prefork=5 maxchild=200
> 
> and then update your /etc/services with an lmtp entry for port 26?

Yes, that was my "normal" configuration.
I've changed the lmtp port from 24 to 26 in /etc/services and uses the service-name.

Now, I've already found the bug.
The init.d script by Simon Matter makes the problem.

When I use `/usr/lib/cyrus-imapd/cyrus-master -C /etc/imapd.conf -M /etc/cyrus.conf -p /var/run/cyrus-master.pid -d` at the CLI, then is no problem: the lmtpd listen on port 26.

Now I must check the init-script...

thanks for you reply.

kr
Klemens 
> -- 
> Dan White