Problem rebuilding Simons new source RPM

[Simon Matter]

Harris Landgarten schrieb:
> 
> I tracked down the cause of the problem but am still looking for the
> source.
> 
> For some reason perl man pages are being installed to /usr/man instead
> of  /usr/shared/man
> 
> This causes the find /var/tmp/cyrus-imapd-2.1.10-root/usr/share/man
> -type f -name "Cyrus*" to find nothing and the following string of
> commands to fail with an error.

Did you look at the spec file? It uses %{_mandir}:

find %{buildroot}%{_mandir} -type f -name "Cyrus*" -print |

If your installation is broken, I can't fix it for you :)

Simon

> 
> Do you have any idea what could be causing this?
> 
> Harris
> 
> On Mon, 2002-11-25 at 04:01, Simon Matter wrote:
> > Hi,
> >
> > The only thing I can say is that the source RPM build fine on a
> > untouched RedHat 8.0 installation. I can't make sure it will build on a
> > system where many packages have been installed from other places than
> > the distribution RPMs.
> >
> > It's as easy as this:
> > - Install RedHat 8.0.
> > - Rebuild the source RPM.
> >
> > Simon
> >
> > >
> > > I am currently running Cyrus 2.1.9 under Redhat 8 using Simons source RPM. I had no problem recompiling and
> > > installing from the source RPM per documentation. Subsequently I have updated many Perl Modules. When I try to
> > > rebuild the 2.1.10-3 rpm from source I get an error during the rebuild process. The error is from this section of
> > > shell script:
> > >
> > >
> > >
> > > # Create filelist for perl package, compress manpages before
> > >
> > > [ -x /usr/lib/rpm/brp-compress ] && /usr/lib/rpm/brp-compress
> > >
> > > find /var/tmp/cyrus-imapd-2.1.10-root/usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/Cyrus
> > > /var/tmp/cyrus-imapd-2.1.10-root/usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/Cyrus -type f -print |
> > >
> > >   sed "s@^/var/tmp/cyrus-imapd-2.1.10-root@@g" |
> > >
> > >   grep -v perllocal.pod |
> > >
> > >   grep -v "\.packlist" > perl-Cyrus-2.1.10-filelist
> > >
> > > find /var/tmp/cyrus-imapd-2.1.10-root/usr/share/man -type f -name "Cyrus*" -print |
> > >
> > >   sed "s@^/var/tmp/cyrus-imapd-2.1.10-root@@g" |
> > >
> > >   grep -v perllocal.pod |
> > >
> > >   grep -v "\.packlist" >> perl-Cyrus-2.1.10-filelist
> > >
> > > if [ "$(cat perl-Cyrus-2.1.10-filelist)X" = "X" ] ; then
> > >
> > >   echo "ERROR: EMPTY FILE LIST"
> > >
> > >   exit -1
> > >
> > > fi
> > >
> > >
> > >
> > > It appears that perl-Cyrus-2.1.10-filelist is never being written at all. If I manually run these commands after
> > > erroring out, perl-Cyrus-2.1.10-filelist is properly written. I am not sure how to debug an rpmbuild -rebuild so I
> > > can see what is going on. BTW, when I try rpmbuild -rebuild on the original 2.1.9 source RPM that I originally
> > > installed from, it errors out in the same place. When I tried rebuilding on another Redhat 8.0 box on which the perl
> > > modules are relatively untouched, the rpmbuild ran to conclusion.
> > >
> > >
> > >
> > > Any ideas on what is going on or how to debug an rpmbuild -rebuild would be appreciated.
> > >
> > >
> > >
> > > Harris
> --
> Harris Landgarten <harrisl at lhjonline.com>