cyradm > lm returns empty list but mailboxes are accessible via

[alexp at beautybase.com]

I asked this question (see below) two weeks ago but had no reply. Just
posting it one more time, hoping to get an answer :)

thanks

> I do not know what went wrong but now if I log in using cyradm to
> administrator console i can't get nither mailboxes list nor
create/delete > functionality or even see info.
>
> What i did was patched the  system (instructions below) and now sieve
> works fine..
>
> please advise.
> alex
>
> patching instractions
>> I have installed Cyrus+SIEVE and i can even see SIEVE running if i
>>> telnet
>>> to the 2000 port, but if i run  sieveshell
>>> I get the following error.
>>>
>>> Can't locate Cyrus/SIEVE/managesieve.pm in @INC (@INC contains:
>>> /usr/lib/perl5/5.8.3/i386-linux-thread-multi /usr/lib/perl5/5.8.3
>>> /usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi
>>> /usr/lib/perl5/site_perl/5.8.2/i386-linux-thread-multi
>>> /usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi
>>> /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi
>>> /usr/lib/perl5/site_perl/5.8.3 /usr/lib/perl5/site_perl/5.8.2
>>> /usr/lib/perl5/site_perl/5.8.1 /usr/lib/perl5/site_perl/5.8.0
>>> /usr/lib/perl5/site_perl
>>> /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi
>>> /usr/lib/perl5/vendor_perl/5.8.2/i386-linux-thread-multi
>>> /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi
>>> /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi
>>> /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.2
>>> /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl/5.8.0
>>> /usr/lib/perl5/vendor_perl .) at /usr/local/bin/sieveshell line 44.
>>> BEGIN failed--compilation aborted at /usr/local/bin/sieveshell line 44.
>>>
>>> but the module is there
>>>
>>> locate /managesieve.pm
>>> /usr/local/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi/Cyrus/SIEVE/managesieve.pm
>>> /usr/local/src/cyrus-imapd-2.2.12/perl/sieve/managesieve/managesieve.pm
>>> /usr/local/src/cyrus-imapd-2.2.12/perl/sieve/managesieve/blib/lib/Cyrus/SIEVE/managesieve.pm
>>> /usr/local/src/cyrus-imapd-2.2.13/perl/sieve/managesieve/managesieve.pm
>>> /usr/local/src/cyrus-imapd-2.2.13/perl/sieve/managesieve/blib/lib/Cyrus/SIEVE/managesieve.pm
>>> /opt/cyrus-imapd-2.2.12/perl/sieve/managesieve/managesieve.pm
>>> /opt/cyrus-imapd-2.2.12/perl/sieve/managesieve/blib/lib/Cyrus/SIEVE/managesieve.pm
>>>
>>>
>>>
>>> Please help. I have wasted 2 days already. Re-installed from scratch
>>> the
>>> whole system number of times. What i am actually is trying to archive
>>> is
>>> to create SIEVE script which will be placing 'users' spam messages
>>> (marked
>>> as a SPAM in the subj. field by SpamAssassin) into user.$user.Spam
>>> folder.
>>
>> The failure-message tells you that sieveshell cannot locate the
>> managesieve.pm, and also all the places where it looked. So there are
>> two possible solutions: either tell perl to also look in /usr/local/lib
>> for managesieve.pl, or to install the perl parts of Cyrus not in
>> /usr/local but in /usr/lib/perl5. I've opted for the second solution,
>> and every time I build Cyrus, I apply a simple patch (included).
>> The only drawback it has is that sieveshell itself will be installed in
>> /usr/lib/perl5 as well.
>> The patch can be installed by doing:
>>
>> cd cyrus-imapd-2.2.12
>> make distclean
>> patch -p1 < cyrus-imapd-perl_prefix.patch
>> ./configure <any options>
>> make
>
>
> ----
> Cyrus Home Page: http://asg.web.cmu.edu/cyrus
> Cyrus Wiki/FAQ: http://cyruswiki.andrew.cmu.edu
> List Archives/Info: http://asg.web.cmu.edu/cyrus/mailing-list.html
>