Fatal error: tls_start_servertls (fwd)

[Mike Allen]

---------- Forwarded message ----------
Date: Tue, 2 Sep 2003 09:16:36 -0700 (PDT)
From: Mike Allen <mallen at familyradio.org>
To: Pat Lashley <patl at volant.org>
Cc: Ken Murchison <ken at oceana.com>, info-cyrus at lists.andrew.cmu.edu,
     mwood at familyradio.org
Subject: Re: Fatal error: tls_start_servertls

Thanks to Ken and Pat for their great help.  Please see my
comments interspersed with yours below.

Mike Allen

On Tue, 2 Sep 2003, Pat Lashley wrote:

> --On Monday, September 01, 2003 21:08:25 -0400 Ken Murchison
> <ken at oceana.com> wrote:
>
> >> There is no /etc/sasldb file.  There is a /usr/local/etc/sasldb2 file
> >> and the result of the 'file' command on it yields:
> >>
> >>      sasldb2: Berkeley DB (Hash, version 8, native byte-order)
> >>
> >> I compiled cyrus-imapd2 as a 'port' on my FreeBSD machine with
> >> nothing but default options.
> >
> > Well, since your saskdb2 file is in a non-default location, you're going
> > to have to tell the library where it is.  You should have at least these
> > options:
> >
> > sasl_pwcheck_method: auxprop
> > sasl_sasldb_path: /usr/local/etc/sasldb2
>
> No, that shouldn't be necessary - the FreeBSD port makes that the default
> location at compile time.  (In FreeBSD, non-bundled software is normally
> installed in /usr/local rather than in the system directories.)
>
> Check ownership and permissions.  Verify that it is readable by user
> cyrus.  (Or whatever userid you specify in /usr/local/etc/imapd.conf.
> The FreeBSD port uses 'cyrus' by default.)

It is fine.
[mail2] /usr/local/etc# ls -ld sasldb2
-rw-r-----  1 cyrus  mail  49152 Aug 28 11:05 sasldb2

>
> Also, run sasldblistusers2 to verify that you have an entry in the
> database.

There appears to be no users in the database.  This will be fixed
shortly.

>
> And check to make sure that the imapd was actually built using the
> right version of cyrus-sasl.  Run 'ldd /usr/local/cyrus/bin/imapd'
> It should use libsasl.so.3.

[mail2] ~# ldd /home/cyrus/bin/imapd
/home/cyrus/bin/imapd:

        libsasl2.so.2 => /usr/local/lib/libsasl2.so.2 (0x2813a000)
Is this OK?

        libdb3.so.3 => /usr/local/lib/libdb3.so.3 (0x2814e000)
        libssl.so.3 => /usr/lib/libssl.so.3 (0x281da000)
        libcrypto.so.3 => /usr/lib/libcrypto.so.3 (0x2820b000)
        libmd.so.2 => /usr/lib/libmd.so.2 (0x28316000)
        libwrap.so.3 => /usr/lib/libwrap.so.3 (0x28320000)
        libc.so.5 => /usr/lib/libc.so.5 (0x28328000)
[mail2] ~#

I note the location of imapd.  It is not in any existing path.
I'll change that shortly also.
>
>
>
> -Pat
>
Thanks again for all your help.

Mike Allen