Problem compiling imapd 2.1.12 on AIX 5

Fri Feb 7 10:30:59 EST 2003

I noticed that I included the output from a previous configure run. I did 
compile and install makedepend, even though that is not apparent in this 
configure run.

The pushstats.h error and the undeclared identifier errors look to be 
related to the snmp calls. Yet I still get these errors, even if I use the 
"--with-ucdsnmp=no" or "--without-ucdsnmp" configure options.

I have tried some different AIX compiler options to no avail. I can always 
fall back to compiling with gcc, but I would like to figure out why I 
cannot use the IBM compiler. Any input is appreciated.

-cpallone

--On Thursday, February 06, 2003 11:18:13 -0600 "Christopher S. Pallone" 
<cpallone at michaels.com> wrote:

> First off, thank you for you help in advance. Secondly, I'm sorry for
> such a long email. I figure the more info up front, the less time to
> troubleshoot the problem. ;)
>
> I am using:
> --------------------------------------------
> CforAIX V5.0.2.5 (vac.C)
> GNU Make V3.80
> Cyrus SASL V2.1.12 (saslauthd w/LDAP)
>
>
> I run configure with the following options:
> --------------------------------------------
> env CC=xlc MAKE=gmake \
> CFLAGS="-O -qMAXMEM=16384 -brtl" \
> CPPFLAGS="-I/usr/local/include" \
> LDFLAGS="-L/usr/local/lib" \
> ./configure --with-cyrus-prefix=/usr/local/cyrus-imapd-2.1.12 \
> --prefix=/usr/local/cyrus-imapd-2.1.12 \
> --with-statedir=/var/imapd \
> --with-bdb-libdir=/usr/local/BerkeleyDB-4/lib \
> --with-bdb-incdir=/usr/local/BerkeleyDB-4/include \
> --with-cyrus-group=mail \
> --with-cyrus-user=cyrus \
> --with-openssl=/usr/local/openssl \
> --with-sasl=/usr/local \
> --enable-fulldirhash \
> --enable-netscapehack
>
> Configure seems to run without error:
> ----------------------------------------------
> creating cache ./config.cache
> checking host system type... rs6000-ibm-aix
> checking for makedepend...
> /home/cpallone/src/cyrus-imapd-2.1.12/tools/not-mkdep configure: warning:
> Makedepend is not installed on this system.  You should compile and
> install the version from the makedepend subdirectory. checking for gcc...
> xlc
> checking whether the C compiler (xlc -O -qMAXMEM=16384 -brtl
> -qalias=noansi -qsrcmsg -r -L/usr/local/lib) works... yes checking
> whether the C compiler (xlc -O -qMAXMEM=16384 -brtl -qalias=noansi
> -qsrcmsg -r -L/usr/local/lib) is a cross-compiler... yes checking whether
> we are using GNU C... no
> checking whether xlc accepts -g... yes
> checking for ranlib... ranlib
> checking whether gmake sets ${MAKE}... yes
> checking for a BSD compatible install... ./install-sh -c
> checking how to run the C preprocessor... xlc -E
> checking for AIX... yes
> checking for strerror in -lcposix... no
> checking for mawk... no
> checking for gawk... no
> checking for nawk... nawk
> checking for working const... yes
> checking for long file names... yes
> checking for __attribute__... no
> checking for runpath switch... -R
> checking for unistd.h... yes
> checking for sys/select.h... yes
> checking for sys/param.h... yes
> checking for memmove... yes
> checking for strcasecmp... yes
> checking for ftruncate... yes
> checking for strerror... yes
> checking for dirent.h that defines DIR... yes
> checking for opendir in -ldir... no
> checking for connect... yes
> checking for res_search... yes
> checking for dn_expand... yes
> checking for dns_lookup... yes
> checking for getaddrinfo... yes
> checking for gai_strerror... yes
> checking for getnameinfo... yes
> checking whether struct tm is in sys/time.h or time.h... time.h
> checking for tm_zone in struct tm... no
> checking for tzname... yes
> checking for vprintf... yes
> checking for db.h... yes
> checking for db_create in -ldb-4.1... yes
> checking duplicate db database backend... db3_nosync
> checking mboxlist database backend... db3
> checking seen state database backend... flat
> checking subscription database backend... flat
> checking TLS cache database backend... db3_nosync
> checking for bison... bison -y
> checking for flex... flex
> checking for yywrap in -lfl... yes
> checking for main in -lfl... yes
> checking for library containing regcomp... none required
> checking for rxposix.h... no
> checking for strerror... (cached) yes
> checking for sys/resource.h... yes
> checking for setrlimit... yes
> checking for getrlimit... yes
> checking for daemon... yes
> checking for setsid... yes
> checking for setproctitle... yes
> checking nonblocking method... fcntl
> checking timezone GMT offset method... gmtime
> checking for shared mmap... no
> checking for stupid shared mmap... no
> configure: warning: *** This system does not have a working mmap()
> configure: warning: *** Expect a considerable performance penalty
> checking for fcntl... yes
> checking for fdatasync... yes
> checking for sigvec... yes
> checking for openssl... /usr/local/openssl
> checking for ZInitialize in -lzephyr... no
> checking for com_err.h... no
> configure: warning: com_err is required; included version will be used.
> checking for modern syslog... yes
> checking for getdtablesize... yes
> checking to use old sieve service name... no
> checking for dlopen... yes
> checking for sasl/sasl.h... yes
> checking for sasl/saslutil.h... yes
> checking for prop_get in -lsasl2... yes
> checking for sasl_checkapop in -lsasl2... yes
> checking for perl... perl
> checking for MD5Init... yes
> checking for request_init in -lwrap... no
> checking libwrap support... no
> checking for sprint_objid in -lsnmp... yes
> checking for ucd-snmp/version.h... no
> checking UCD SNMP libraries... no
> updating cache ./config.cache
> creating ./config.status
> creating man/Makefile
> creating master/Makefile
> creating lib/Makefile
> creating acap/Makefile
> creating imap/Makefile
> creating imap/feedcyrus
> creating imtest/Makefile
> creating netnews/Makefile
> creating perl/Makefile
> creating sieve/Makefile
> creating et/Makefile
> creating timsieved/Makefile
> creating notifyd/Makefile
> creating perl/sieve/Makefile
> creating perl/sieve/lib/Makefile
> creating Makefile
> creating config.h
>
>
> Next I run gmake depend; gmake and fail with the following:
> --------------------------------------------------
> ... skipping down to error ...
>### Making all in /home/cpallone/src/cyrus-imapd-2.1.12/imap
> gmake[1]: Entering directory `/usr/netscape/src/cyrus-imapd-2.1.12/imap'
> ./../snmp/snmpgen ./pushstats.snmp
> basename pushstats
> ./../snmp/snmpgen ./lmtpstats.snmp
> basename lmtpstats
> rm -f version.o
> AWK=nawk ./xversion.sh
> ../et/compile_et ./mupdate_err.et
> xlc -c -I. -I.. -I. -I./../lib -I./../sieve -I./../acap -I./../et
> -I./../sieve -I/usr/local/BerkeleyDB-4/include -I/usr/local/include
> -I/usr/local/include -I/usr/local/openssl/include -I/usr/local/include
> -DHAVE_CONFIG_H  -O -qMAXMEM=16384 -brtl \ pushstats.c
> "pushstats.c", line 576.1: 1506-356 (W) Compilation unit is empty.
> xlc -c -I. -I.. -I. -I./../lib -I./../sieve -I./../acap -I./../et
> -I./../sieve -I/usr/local/BerkeleyDB-4/include -I/usr/local/include
> -I/usr/local/include -I/usr/local/openssl/include -I/usr/local/include
> -DHAVE_CONFIG_H  -O -qMAXMEM=16384 -brtl \ backend.c
> xlc -c -I. -I.. -I. -I./../lib -I./../sieve -I./../acap -I./../et
> -I./../sieve -I/usr/local/BerkeleyDB-4/include -I/usr/local/include
> -I/usr/local/include -I/usr/local/openssl/include -I/usr/local/include
> -DHAVE_CONFIG_H  -O -qMAXMEM=16384 -brtl \ imapd.c
> "pushstats.h", line 39.29: 1506-211 (S) Parameter list must be empty, or
> consist of one or more identifiers separated by commas. "imapd.c", line
> 110.13: 1506-334 (S) Identifier imapd_clienthost has already been defined
> on line 67 of "imapd.h". "imapd.c", line 114.12: 1506-334 (S) Identifier
> imapd_userisadmin has already been defined on line 58 of "imapd.h".
> "imapd.c", line 125.23: 1506-334 (S) Identifier imapd_mailbox has already
> been defined on line 61 of "imapd.h". "imapd.c", line 1783.29: 1506-045
> (S) Undeclared identifier AUTHENTICATION_NO. "imapd.c", line 1784.29:
> 1506-045 (S) Undeclared identifier VARIABLE_AUTH. "imapd.c", line
> 1785.29: 1506-045 (S) Undeclared identifier VARIABLE_LISTEND. "imapd.c",
> line 1791.29: 1506-045 (S) Undeclared identifier AUTHENTICATION_YES.
> "imapd.c", line 1869.33: 1506-045 (S) Undeclared identifier
> AUTHENTICATION_NO. "imapd.c", line 1870.33: 1506-045 (S) Undeclared
> identifier VARIABLE_AUTH. "imapd.c", line 1871.33: 1506-045 (S)
> Undeclared identifier VARIABLE_LISTEND. "imapd.c", line 1925.25: 1506-045
> (S) Undeclared identifier AUTHENTICATION_YES. "imapd.c", line 2246.29:
> 1506-280 (E) Function argument assignment between types "int*" and
> "unsigned int*" is not allowed. gmake[1]: *** [imapd.o] Error 1
> gmake[1]: Leaving directory `/usr/netscape/src/cyrus-imapd-2.1.12/imap'
> gmake: *** [all] Error 1
>
>
> Let me know if there is any further information I can provide.
> Thanks,
>
> Christopher S. Pallone
> UNIX Consultant
>