Looking for install guide

[Simon Matter]

>
> To fix the RH 9 DB4 problem you need to recompile from source RPM using a
> update db4.spec file.  You can get more info at the link below

You only need the modified db4 rpm if you're on something else thant a
Intel i686*something. The db4 problem is a runtime problem, not build
time. I don't think the person who askes had runtime problems.

Simon

>
> http://home/teleport.ch/simix
>
> The compile isn't  that hard but you will need to install jdkgcj.  The
> source RPM is available in the SOURCES directory in the RedHat 9 mirrors.
>
> jdkgcj, also has several dependencies including gcc-java and libgcj.
>
> After installing dependency RPMS, compile jdkgcj  (rpmbuild -bb
> jdkgcj.spec) .  Then compile db4 with the following steps
>
> 1. Install the db4 source rpm
> 2. Copy new db4.spec file over the original, copy to
> /usr/src/redhat/SPECS
> (download new spec from http://home/teleport.ch/simix)
> 3. cd /usr/src/redhat/SPECS
> 4. rpmbuild -bb db4.spec
> 5. rpm -Uvh /usr/src/redhat/RPMS/i386/db4.4.-.14-20_nonptl.i386.rpm
> 6. Restart cyrus-imaps and it should start with no db error.
>
> good luck,
>
> Tony
>
>
> |---------+------------------------------------->
> |         |           David Meier               |
> |         |           <MEIER at logmail.net>       |
> |         |           Sent by:                  |
> |         |           owner-info-cyrus at lists.and|
> |         |           rew.cmu.edu               |
> |         |                                     |
> |         |                                     |
> |         |           08/22/2003 09:25 AM       |
> |---------+------------------------------------->
>   >------------------------------------------------------------------------------------------------------------------------------|
>   |
>                                                       |
>   |       To:       info-cyrus at lists.andrew.cmu.edu
>                                                       |
>   |       cc:
>                                                       |
>   |       Subject:  Re: Looking for install guide
>                                                       |
>   >------------------------------------------------------------------------------------------------------------------------------|
>
>
>
>
> Hi,
>
> I was able to install cyrus on RH9 using that guide. I do also recall I
> had
> trouble with db4. Unfortunately I didn't write down any remarks on this
> but
> I think I used the rpm's from the CD at the end (looking at my
> --with-dbdir
> directive below). The command I used to compile was:
>
> $ export CPPFLAGS="-I/usr/kerberos/include"
> $ ./configure --with-sasl=/usr/local/lib --with-perl --with-auth=unix \
>   --with-dbdir=/usr --with-openssl=/usr/local/ssl --without-ucdsnmp
>
> Hope this helps...
>
> Dave
>
>>
>> Hi all,
>>
>> I see several people have successfully installed cyrus and such on
>> RH9.  I have followed Luc de Louw's Postfix-Cyrus-Web-cyradm-HOWTO
>> to no avail.
>> I keep blowing up in several area's of the make section (notably the
>>  cyrus-imap and the db-4).
>>
>> Is there an updated pointer to this file that anyone is aware of? (
>> I believe I have seen posts alluding to this, but the archive
>> searches have yielded no hits for me).
>>
>> Thanks and very much appreciated.
>> Regards, Jeff.
>>
>>
>
>
>
>
>