[Disksim-users] Dixtrac and topology questions

[李兆虎]

For question 1,I don't think DIXtrac can help you .I have use it work on a disk about 300G,but it dosen't work.DIXtrac will work on small disk.

At 2012-06-16 06:05:14,"Ricardo Rey" <ricardoreyyy at gmail.com> wrote:
Hi!

I have a couple of questions:

1) How do I generate a ".diskspecs" file for some disk type? Do I have to use DIXtrac? Or is there some other way? And, about this... does anyone know if there is some repository of *.diskspecs somewhere?

2) I would like to test some high-availability topologies with redundancy; something like this:

    topology disksim_iodriver ctlr0 [
        disksim_bus bus1 [
            disksim_disk disk0 []
            disksim_disk disk1 []
        ]
        disksim_bus bus2 [
            disksim_disk disk0 []
            disksim_disk disk1 []
        ]
    ]

Note that disk0 and disk0 are connected to both buses. Is it possible to build such an architecture?

What I want to do is test some worst-case-scenarios, with some components failing, and how would the system respond to that. That is why I need this redundant topology.

Thanks in advance

- Rick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.andrew.cmu.edu/pipermail/disksim-users/attachments/20120618/4157a458/attachment.html>