Cyrus SASL + Compile
Hiro Lalwani
meetmehiro at gmail.com
Thu Sep 10 15:26:33 EDT 2009
Hi Kyle,
Problem get resolved. thanks again and again.
I have tried below steps.
1.downloaded to the libtool
/usr/local/bin/libtool --version
ltmain.sh (GNU libtool) 2.2.6
2.extract the whole source code and run ./configure.
3.Copied the libtool file into the cyrus SASL code.
4.run the gmake and check ./libs and chatr/ldd no any symbol missing.
Now I will try to configure with the sendmail and update you.
============================================================
chatr libgssapiv2.sl
libgssapiv2.sl:
shared library
shared library dynamic path search:
SHLIB_PATH disabled second
embedded path enabled first /usr/lib/sasl2
shared library list:
dynamic /usr/lib/libgssapi_krb5.sl
dynamic /usr/lib/libkrb5support.sl
dynamic /usr/lib/libgss.sl
dynamic /usr/lib/libkrb5.sl
dynamic /usr/lib/libk5crypto.sl
dynamic /usr/lib/libcom_err.sl
dynamic /opt/openssl/lib/libcrypto.sl.0
dynamic /usr/lib/libpthread.1
dynamic /usr/lib/libc.2
==========================================
thanks again.
Hiro Lalwani
On Fri, Sep 11, 2009 at 12:04 AM, Kyle Chapman <Kyle.Chapman at pb.com> wrote:
> try this as a test:
> 1. grab libtool 1.5.10 (or higher)
> 2. extract and run ./configure
> 3. in your sasl src dir, run gmake clean
> 4. copy the libtool file from the 1.5.10 dir into your sasl src root
> 5. gmake, go into plugins/.libs
> 6. check chatr/ldd on the libs then
>
> i have seen libtool act odd on hp in the past so just trying something
> diff...
>
> ------------------------------
> *From:* Hiro Lalwani [mailto:meetmehiro at gmail.com]
> *Sent:* Thursday, September 10, 2009 2:25 PM
> *To:* Kyle Chapman
> *Cc:* Alexey Melnikov; cyrus-sasl at lists.andrew.cmu.edu
> *Subject:* Re: Cyrus SASL + Compile
>
> Hi Kyle,
> Thanks again !!!!!
>
> Please find the libc Patch and ld version details. all are updated.
>
> PHCO_34599 1.0 libc cumulative patch
> ld -V
> 92453-07 linker command s800.sgs ld PA64 B.11.59 REL 061208
> ld: 92453-07 linker linker ld B.11.55 060724
>
> *Please find the below chatr out. which seems Completely different which
> you have pasted chatr o/p in the previous mail .
> *
>
> *chatr libdigestmd5.sl*
> libdigestmd5.sl:
> shared library
> shared library dynamic path search:
> SHLIB_PATH disabled second
> embedded path disabled first Not Defined
> internal name:
> libdigestmd5.sl.2
> shared vtable support disabled
> explicit unloading enabled
> static branch prediction disabled
> executable from stack: D (default)
> kernel assisted branch prediction enabled
> lazy swap allocation disabled
> text segment locking disabled
> data segment locking disabled
> third quadrant private data space disabled
> fourth quadrant private data space disabled
> third quadrant global data space disabled
> data page size: D (default)
> instruction page size: D (default)
> nulptr references disabled
> shared library private mapping disabled
>
>
>
> Could you please tell me, what is going wrong here ?
>
>
> thanks in advance
> Hiro Lalwani
>
> On Thu, Sep 10, 2009 at 11:13 PM, Kyle Chapman <Kyle.Chapman at pb.com>wrote:
>
>> when i check:
>>
>> chatr libgssapiv2.sl
>> libgssapiv2.sl:
>> shared library
>> shared library dynamic path search:
>> SHLIB_PATH disabled second
>> embedded path enabled first /usr/lib/sasl2
>> internal name:
>> libgssapiv2.sl.2
>> shared library list:
>> dynamic /opt/mit/lib/libgssapi_krb5.2
>> dynamic /opt/mit/lib/libkrb5.3
>> dynamic /opt/mit/lib/libk5crypto.3
>> dynamic /opt/mit/lib/libcom_err.3
>> dynamic /opt/mit/lib/libkrb5support.0
>> dynamic /usr/lib/libc.2
>>
>> chatr libotp.sl
>> libotp.sl:
>> shared library
>> shared library dynamic path search:
>> SHLIB_PATH disabled second
>> embedded path enabled first /usr/lib/sasl2
>> internal name:
>> libotp.sl.2
>> shared library list:
>> dynamic /opt/openssl/lib/libcrypto.sl
>> dynamic /usr/local/lib/libopie.sl.2.4
>> dynamic /usr/lib/libc.2
>>
>> chatr libdigestmd5.sl
>> libdigestmd5.sl:
>> shared library
>> shared library dynamic path search:
>> SHLIB_PATH disabled second
>> embedded path enabled first /usr/lib/sasl2
>> internal name:
>> libdigestmd5.sl.2
>> shared library list:
>> dynamic /opt/openssl/lib/libcrypto.sl
>> dynamic /usr/lib/libc.2
>>
>>
>> i happen to be using openldap 2.4.17 on this system, and using gssapi and
>> digest-md5 sasl mechs with ldapsearch work...
>> perhaps related, are you up to date with libc/ld patches?
>>
>> here is my ld ver.
>> ld -V
>> 92453-07 linker command s800.sgs ld PA64 B.11.63 REL 071126
>>
>> my libc patch level:
>> PHCO_34599
>>
>> ------------------------------
>> *From:* Hiro Lalwani [mailto:meetmehiro at gmail.com]
>> *Sent:* Thursday, September 10, 2009 1:25 PM
>> *To:* Kyle Chapman; Alexey Melnikov
>>
>> *Cc:* cyrus-sasl at lists.andrew.cmu.edu
>> *Subject:* Re: Cyrus SASL + Compile
>>
>> Hi Kyle / Alexey,
>>
>> I have run the configure with parameters(*CC,CFLAGS*...) which is
>> suggested by Kyle on *11.23 PA-UNIX* system and still I am seeing same
>> Undefined symbol issue with PA system also.
>>
>> Please find the below run.sh file , which I have used for the "configure"
>>
>> ==========================================================
>> export LIBS="-lgss -lkrb5 -lk5crypto -lcom_err -lcrypto -lpthread"
>> export CC="cc -Ae"
>> export CFLAGS="-I/usr/local/include"
>> export CPPFLAGS="-I/usr/local/include"
>> export LDFLAGS="-L/usr/local/lib -Wl,+b -Wl,/usr/local/lib"
>> ./configure --prefix=/opt/iexpress/cyrussasl --enable-krb4 \
>> --enable-login --with-openssl=/opt/openssl \
>> --with-bdb-incdir=/usr/local/include --enable-static --enable-shared=yes \
>> --enable-digest --enable-gssapi=/usr/lib/
>> ============================================================
>>
>> Please find the attached "*configure_logs*", "*gmake_logs*" and "*
>> gmake_install_logs*" . could you please look into this and let me know
>> what is still missing?
>>
>> I am requesting you, please help me to resolve this issue and I am
>> continuously seeing this issue.
>>
>>
>>
>> ===================================================
>> ldd -r libgssapiv2.sl.2.23
>> * symbol not found: GSS_C_NT_HOSTBASED_SERVICE
>> (libgssapiv2.sl.2.23)
>> symbol not found: GSS_C_NT_USER_NAME (libgssapiv2.sl.2.23)
>> * symbol not found: __SB_masks (libgssapiv2.sl.2.23)
>> symbol not found: memset (libgssapiv2.sl.2.23)
>> symbol not found: _isdigit (libgssapiv2.sl.2.23)
>> symbol not found: getaddrinfo (libgssapiv2.sl.2.23)
>> symbol not found: memcpy (libgssapiv2.sl.2.23)
>> symbol not found: freeaddrinfo (libgssapiv2.sl.2.23)
>> symbol not found: strlen (libgssapiv2.sl.2.23)
>> symbol not found: strcpy (libgssapiv2.sl.2.23)
>> symbol not found: strchr (libgssapiv2.sl.2.23)
>> symbol not found: strncpy (libgssapiv2.sl.2.23)
>> symbol not found: strcat (libgssapiv2.sl.2.23)
>> symbol not found: strerror (libgssapiv2.sl.2.23)
>> symbol not found: uname (libgssapiv2.sl.2.23)
>> symbol not found: snprintf (libgssapiv2.sl.2.23)
>> symbol not found: gss_display_status (libgssapiv2.sl.2.23)
>> symbol not found: gss_release_buffer (libgssapiv2.sl.2.23)
>> symbol not found: gss_wrap (libgssapiv2.sl.2.23)
>> symbol not found: gss_unwrap (libgssapiv2.sl.2.23)
>> symbol not found: gss_delete_sec_context
>> (libgssapiv2.sl.2.23)
>> symbol not found: gss_release_name (libgssapiv2.sl.2.23)
>> symbol not found: gss_release_cred (libgssapiv2.sl.2.23)
>> symbol not found: sprintf (libgssapiv2.sl.2.23)
>> symbol not found: gss_import_name (libgssapiv2.sl.2.23)
>> symbol not found: gss_acquire_cred (libgssapiv2.sl.2.23)
>> symbol not found: gss_accept_sec_context
>> (libgssapiv2.sl.2.23)
>> symbol not found: gss_display_name (libgssapiv2.sl.2.23)
>> symbol not found: gss_compare_name (libgssapiv2.sl.2.23)
>> symbol not found: strdup (libgssapiv2.sl.2.23)
>> symbol not found: gss_wrap_size_limit (libgssapiv2.sl.2.23)
>> symbol not found: gss_init_sec_context (libgssapiv2.sl.2.23)
>> symbol not found: gss_inquire_context (libgssapiv2.sl.2.23)
>> symbol not found: __sys_atexit (/usr/ccs/lib/lddstub)
>> symbol not found: __errno (/usr/ccs/lib/lddstub)
>>
>> =================================================================================
>>
>>
>> Thanks in advance
>> Hiro Lalwani
>>
>>
>>
>>
>> On Thu, Sep 10, 2009 at 1:05 AM, Kyle Chapman <Kyle.Chapman at pb.com>wrote:
>>
>>> it cant hurt to try that.
>>>
>>> ------------------------------
>>> *From:* Hiro Lalwani [mailto:meetmehiro at gmail.com]
>>> *Sent:* Wednesday, September 09, 2009 2:45 PM
>>> *To:* Kyle Chapman
>>> *Cc:* Alexey Melnikov; cyrus-sasl at lists.andrew.cmu.edu
>>>
>>> *Subject:* Re: Cyrus SASL + Compile
>>>
>>> Hi Kyle,
>>>
>>> This is the *hpux ia64 system*. and system is up *with 11.23*.
>>>
>>> Can I go ahead and re-build again with below flags which you have
>>> mentioned in mail ?
>>>
>>> ========================
>>> CC=cc -Ae
>>> CFLAGS=-I/usr/local/include
>>> CPPFLAGS=-I/usr/local/include
>>> LDFLAGS=-L/usr/local/lib -Wl,+b -Wl,/usr/local/lib
>>> =====================================
>>>
>>>
>>>
>>> Regards
>>> Hiro Lawani
>>>
>>>
>>> On Wed, Sep 9, 2009 at 11:58 PM, Kyle Chapman <Kyle.Chapman at pb.com>wrote:
>>>
>>>> i would not use: LDFLAGS="-Wl,+nodefaultrpath"
>>>>
>>>> is this hpux ai64 and parisc? i have just built this on 11iv2/parisc
>>>> and not had this missing symbol issue. note that i set:
>>>> CC=cc -Ae
>>>> CFLAGS=-I/usr/local/include
>>>> CPPFLAGS=-I/usr/local/include
>>>> LDFLAGS=-L/usr/local/lib -Wl,+b -Wl,/usr/local/lib
>>>>
>>>>
>>>> ------------------------------
>>>> *From:* cyrus-sasl-bounces+kyle_chapman=g1.com at lists.andrew.cmu.edu[mailto:
>>>> cyrus-sasl-bounces+kyle_chapman <cyrus-sasl-bounces%2Bkyle_chapman>=
>>>> g1.com at lists.andrew.cmu.edu] *On Behalf Of *Hiro Lalwani
>>>> *Sent:* Wednesday, September 09, 2009 2:21 PM
>>>> *To:* Alexey Melnikov
>>>> *Cc:* cyrus-sasl at lists.andrew.cmu.edu
>>>> *Subject:* Re: Cyrus SASL + Compile
>>>>
>>>> *missed to add below also in previous mail for DIGEST-MD5.*
>>>>
>>>>
>>>> ldd -r libdigestmd5.so.2.23
>>>> symbol not found: malloc (./libdigestmd5.so.2.23)
>>>> symbol not found: _memcpy (./libdigestmd5.so.2.23)
>>>> symbol not found: uname (./libdigestmd5.so.2.23)
>>>> symbol not found: _memset (./libdigestmd5.so.2.23)
>>>> symbol not found: freeaddrinfo (./libdigestmd5.so.2.23)
>>>> symbol not found: _isupper (./libdigestmd5.so.2.23)
>>>> symbol not found: strerror (./libdigestmd5.so.2.23)
>>>> symbol not found: snprintf (./libdigestmd5.so.2.23)
>>>> symbol not found: DES_key_sched (./libdigestmd5.so.2.23)
>>>> symbol not found: sprintf (./libdigestmd5.so.2.23)
>>>> symbol not found: strncpy (./libdigestmd5.so.2.23)
>>>> symbol not found: getaddrinfo (./libdigestmd5.so.2.23)
>>>> symbol not found: strpbrk (./libdigestmd5.so.2.23)
>>>> symbol not found: __SB_masks (./libdigestmd5.so.2.23)
>>>> symbol not found: strcasecmp (./libdigestmd5.so.2.23)
>>>> symbol not found: DES_ede3_cbc_encrypt (./libdigestmd5.so.2.23)
>>>> symbol not found: free (./libdigestmd5.so.2.23)
>>>> symbol not found: _isdigit (./libdigestmd5.so.2.23)
>>>> symbol not found: strncasecmp (./libdigestmd5.so.2.23)
>>>> symbol not found: DES_cbc_encrypt
>>>> (./libdigestmd5.so.2.23)
>>>> symbol not found: strcat (./libdigestmd5.so.2.23)
>>>> symbol not found: strchr (./libdigestmd5.so.2.23)
>>>> symbol not found: strcmp (./libdigestmd5.so.2.23)
>>>> symbol not found: strcpy (./libdigestmd5.so.2.23)
>>>> symbol not found: strdup (./libdigestmd5.so.2.23)
>>>> symbol not found: strlen (./libdigestmd5.so.2.23)
>>>> symbol not found: strtol (./libdigestmd5.so.2.23)
>>>> symbol not found: time (./libdigestmd5.so.2.23)
>>>>
>>>>
>>>> * Please help me to resolve this issue... I am continuously seeing this
>>>> issue. *
>>>>
>>>>
>>>> Regards
>>>> Hiro Lalwani
>>>>
>>>>
>>>>
>>>>
>>>> On Wed, Sep 9, 2009 at 11:40 PM, Hiro Lalwani <meetmehiro at gmail.com>wrote:
>>>>
>>>>> Hi Alexey,
>>>>>
>>>>> I have applied a changes what you have suggested and the issue gets
>>>>> resolved and build successfully done.
>>>>>
>>>>> I have used the below parameter during configure,
>>>>>
>>>>>
>>>>> ===================================================================================
>>>>> export LIBS="-lgss -lkrb5 -lk5crypto -lcom_err -lcrypto -lpthread"
>>>>> export CC="aCC "
>>>>> export LDFLAGS="-Wl,+nodefaultrpath"
>>>>> export CFLAGS="+DD32"
>>>>> ./configure --prefix=/opt/iexpress/cyrussasl --enable-krb4 \
>>>>> --enable-login --with-openssl=/opt/openssl \
>>>>> --with-bdb-incdir=/usr/local/include --enable-static
>>>>> --enable-shared=yes \
>>>>> --enable-digest --enable-gssapi=/usr/lib/
>>>>>
>>>>> ======================================================================================
>>>>>
>>>>> But still I am seeing Undefined symbol in below shared libraries after
>>>>> completely successfully build.
>>>>>
>>>>>
>>>>> ==================================================================================================
>>>>> itanika7# ldd -r libgssapiv2.so
>>>>> symbol not found: gss_display_name (./libgssapiv2.so)
>>>>> symbol not found: _memcpy (./libgssapiv2.so)
>>>>> symbol not found: gss_inquire_context (./libgssapiv2.so)
>>>>> symbol not found: uname (./libgssapiv2.so)
>>>>> symbol not found: _memset (./libgssapiv2.so)
>>>>> symbol not found: freeaddrinfo (./libgssapiv2.so)
>>>>> symbol not found: gss_release_name (./libgssapiv2.so)
>>>>> symbol not found: strerror (./libgssapiv2.so)
>>>>> symbol not found: GSS_C_NT_HOSTBASED_SERVICE
>>>>> (./libgssapiv2.so)
>>>>> symbol not found: snprintf (./libgssapiv2.so)
>>>>> symbol not found: sprintf (./libgssapiv2.so)
>>>>> symbol not found: strncpy (./libgssapiv2.so)
>>>>> symbol not found: getaddrinfo (./libgssapiv2.so)
>>>>> symbol not found: gss_acquire_cred (./libgssapiv2.so)
>>>>> symbol not found: __SB_masks (./libgssapiv2.so)
>>>>> symbol not found: gss_init_sec_context (./libgssapiv2.so)
>>>>> symbol not found: gss_import_name (./libgssapiv2.so)
>>>>> symbol not found: gss_delete_sec_context
>>>>> (./libgssapiv2.so)
>>>>> symbol not found: gss_release_buffer (./libgssapiv2.so)
>>>>> symbol not found: gss_wrap (./libgssapiv2.so)
>>>>> symbol not found: gss_compare_name (./libgssapiv2.so)
>>>>> symbol not found: _isdigit (./libgssapiv2.so)
>>>>> *symbol not found: GSS_C_NT_USER_NAME (./libgssapiv2.so)*
>>>>> symbol not found: gss_unwrap (./libgssapiv2.so)
>>>>> symbol not found: gss_wrap_size_limit (./libgssapiv2.so)
>>>>> symbol not found: gss_display_status (./libgssapiv2.so)
>>>>> symbol not found: gss_accept_sec_context
>>>>> (./libgssapiv2.so)
>>>>> symbol not found: gss_release_cred (./libgssapiv2.so)
>>>>> symbol not found: strcat (./libgssapiv2.so)
>>>>> symbol not found: strchr (./libgssapiv2.so)
>>>>> symbol not found: strcpy (./libgssapiv2.so)
>>>>> symbol not found: strdup (./libgssapiv2.so)
>>>>> symbol not found: strlen (./libgssapiv2.so)
>>>>>
>>>>> ==============================================================================================================
>>>>>
>>>>>
>>>>> Could you please tell me, what is wrong here ?
>>>>>
>>>>> Regards
>>>>> Hiro Lalwani
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Tue, Sep 8, 2009 at 10:45 PM, Alexey Melnikov <
>>>>> alexey.melnikov at isode.com> wrote:
>>>>>
>>>>>> Hiro Lalwani wrote:
>>>>>>
>>>>>> Hi All,
>>>>>>>
>>>>>>
>>>>>> Hi,
>>>>>>
>>>>>>> I have downloaded the Cyrus-SASL-2.1.23.
>>>>>>> I am seeing below errors while initiating the "gmake".
>>>>>>>
>>>>>>> -------------------------------------------------------------------------------------------------------------------------
>>>>>>> "common.c", line 500: error #2852: expression must be a pointer to a
>>>>>>> complete
>>>>>>> object type
>>>>>>> next_buf = last_invec.iov_base + last_invec.iov_len;
>>>>>>> ^
>>>>>>> "common.c", line 516: error #2852: expression must be a pointer to a
>>>>>>> complete
>>>>>>> object type
>>>>>>> next_buf = last_invec.iov_base + last_invec.iov_len;
>>>>>>>
>>>>>>>
>>>>>>> -------------------------------------------------------------------------------------------------------------
>>>>>>>
>>>>>>
>>>>>> I wonder if "last_invec.iov_base" is defined as "void *". Try changing
>>>>>> each of the two "last_invec.iov_base" to "(char *)last_invec.iov_base".
>>>>>>
>>>>>> Could any of please tell me, How can I resolve this?
>>>>>>>
>>>>>>> --
>>>>>>> thanks & regards
>>>>>>> Hiro Lalwani
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> thanks & regards
>>>>> Hiro Lalwani
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> thanks & regards
>>>> Hiro Lalwani
>>>>
>>>
>>>
>>>
>>> --
>>> thanks & regards
>>> Hiro Lalwani
>>>
>>
>>
>>
>> --
>> thanks & regards
>> Hiro Lalwani
>>
>
>
>
> --
> thanks & regards
> Hiro Lalwani
>
--
thanks & regards
Hiro Lalwani
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.andrew.cmu.edu/pipermail/cyrus-sasl/attachments/20090911/fc45cc2a/attachment-0001.html
More information about the Cyrus-sasl
mailing list